RAM® Drink Cup Holder

1800-RAM-DRNK-BLK

The RAM Self Leveling Drink Cup holder is the perfect accessory for a long day on the water. Easily installed and positioned to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. The cup holder includes a Double Socket Arm which provides an easy but strong and reliable attachment to a 1" Tough-ball using the SeaMount System. Take a turn as sharp as you like, this holder is ready to ride.

FEATURES:

  • The RAM Self Leveling Cup Holder fits into a 1” Socket Arm for a strong reliable attachment.
  • This accessory is easily installed and functions to bring a wide range of beverages out onto the water

* The RAM Drink Cup holder requires a 1" Tough-Ball 1/4X20 Screw Thread and a Seamount Base Plate.

MATERIAL:

High Strength Composite and Powder Coated Marine Grade Aluminum

All orders placed after 11am will be processed the following day. Orders made after 11am on Friday will get processed the next working day.


QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

SHOP RELATED PRODUCTS

Sold out
Pau Hana Stand Up Paddle Board Roof Rack Straps Surf Co
Sold out
Sold out
Sold out

ACCESSORY FAQS

Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days

Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days

Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days

Please note all days are in business days from the day after that the order is received by Pau Hana.

Prior to 2017, your D-Rings or other accessories may have rusted. Back then, they had dissimilar metals and so galvanic corrosion occurred quickly being in the saltwater aqueous solution. For D-Rings and all other like accessories in 2018 and beyond, this should not be a problem. To keep your D-Rings in good condition, see tips below!

1. Lightly coat any accessory that is going to go into the SeaMount® with a lightweight oil/WD-40 on the thread to make sure that the threads will continue to work well. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.

2. It is a good practice for people to take out any accessory and very importantly fin screws fairly often and to put on a light coat of oil/WD-40 on them again to make sure that the threads are still working.

3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.

4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.

5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.

 

share the stoke!

#PAUHANASURFSUPPLY

Join the Ohana!

Sign up to receive the latest Pau Hana updates straight to your email!