FROM THE PAU HANA SUP SCHOOL
Step 1: Remove the plate from the fin hardware and keep it in your repair kit. It is not needed with a fin box that has threading.
Step 2: Insert the dowel in the large opening of the fin box and slide fin forward.
Step 3: Press the fin down in place. The hole will be lined up with the threading.
Step 4: Insert the thumb screw in the hole and screw into place until hand tight. Do not overtighten.
Step 5: When the Fin is removed store the Thumb Screw in the Repair Kit so it does not get lost.
To shop leashes and fins CLICK HERE.
Also in How To's
HOW TO: Set up the Calypso stand-up kayak
Learn how to install the window, fins and seat in this instructional video.
HOW TO KEEP YOUR PADDLEBOARD STRAIGHT
Learn how to keep your paddleboard tracking in a straight line with tips from the Pau Hana SUP School.
HOW TO: Adjust the Aluminum SUP Paddle
An instructional guide on tightening the shaft clamp and adjusting the Aluminum SUP Paddle.