RAM® X-Grip Phone Holder


The RAM® Universal X-Grip® Phone Holder Accessory allows easy access to the device at any time while maintaining a strong hold on any device. The X-Grip has a clean and clever four leg design that sports great holding power. With a 1" RAM® ball attached to the back, the X-Grip is compatible and interchangeable with many RAM® and SeaMount® accessories. Easy clip in your waterproof device to always have your phone within reach while you are out on the water.
The X-Grip® holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.


  • 1" RAM® ball attached which allows for various attachment to other accessories
  • The RAM® 1" Universal X-Grip® Holder is the go-to mount for any cellular device
  • Use the Double Socket Arm to connect to 1'' Tough Ball for screwing attachment into your board
  • The Universal X-Grip® allows easy access to the device at any time while maintaining a strong hold on any device
  • Spring loaded holder expands and contracts for perfect fit of your device
  • Rustproof and made in the U.S.A.
  • The RAM® Phone Holder requires a 1" RAM® Double Socket Arm, a 11" Tough-Ball 1/4 x 20 Screw Thread and a SeaMount® Base Plate.


  • Rubber coated tips will hold device firm and stable
  • High strength composite and stainless steel construction


  • Minimum Width = 1.875"
  • Maximum Width = 3.25"
  • Depth = 0.875"

*Only waterproof devices or devices in a waterproof case should be used with the X-Grip® when using on a SUP on the water.

All orders placed after 11am will be processed the following day. Orders made after 11am on Friday will get processed the next working day.


Have a Question?

Be the first to ask a question about this.

Ask a Question


Sold out
Pau Hana Stand Up Paddle Board Roof Rack Straps Surf Co
Sold out
Sold out
Sold out


Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days

Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days

Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days

Please note all days are in business days from the day after that the order is received by Pau Hana.

Prior to 2017, your D-Rings or other accessories may have rusted. Back then, they had dissimilar metals and so galvanic corrosion occurred quickly being in the saltwater aqueous solution. For D-Rings and all other like accessories in 2018 and beyond, this should not be a problem. To keep your D-Rings in good condition, see tips below!

1. Lightly coat any accessory that is going to go into the SeaMount® with a lightweight oil/WD-40 on the thread to make sure that the threads will continue to work well. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.

2. It is a good practice for people to take out any accessory and very importantly fin screws fairly often and to put on a light coat of oil/WD-40 on them again to make sure that the threads are still working.

3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.

4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.

5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.


share the stoke!


Join the Ohana!

Sign up to receive the latest Pau Hana updates straight to your email!