1 Base Plate
1 1” Ram® Tough Ball 1/4X20
1 Ram® Mount Cup holder with a Double Socket Arm
Step 1: Lightly Spray the Base Plate screw with lubricating oil, like WD-40 on first use and a couple times a season after that.
Step 2: Place the Base Plate over a SeaMount® where the Base Plate lays flat on the paddle board.
Step 3: Use a phillips head screwdriver to screw the Base Plate into the SeaMount®. Do not overtighten.
Step 4: Hand screw the 1” Ram® Tough Ball into the 1/4X20 threading on the Base Plate.
Step 5: Twist the knob on the Double Socket Arm counter clockwise to loosen/open and attach to the 1” Ram® Tough Ball.
Step 6: Twist the knob on the Double Socket Arm clockwise to secure it to the 1” Ram® Tough Ball.
Step 7: Adjust the knob to get the desired position of the Cup Holder and tighten.
Step 8: Remove the Cup Holder, Tough Ball and Base Plate when traveling or transporting your SUP board.
Step 9: Rinse paddle board and accessories with freshwater if used in saltwater.
To purchase the Ram® Mount Cup Holder and Double Sockert Arm CLICK HERE.
Comments will be approved before showing up.
Join the Ohana!
Sign up to receive the latest Pau Hana updates straight to your email!