1 Bungee Cord
Step 1: Lightly Spray each screw with lubricating oil, like WD-40 on first use and a couple times a season after that.
Step 2: Place each D-Ring over a SeaMount® and use a phillips head screwdriver to screw the D-Rings into place. Do not overtighten screws. The four SeaMounts® on the front of the paddle board are the preferred location for placement for most paddlers.
Step 3: Run the bungee cord through the 4 D-Rings in an “X” pattern.
Step 4: Pull the ends tight and secure with an overhand knot.
Step 5: Rinse paddle board and accessories with freshwater after use in saltwater to avoid rusting.
To purchase the Pau Hana D-rings and bunee CLICK HERE.
Comments will be approved before showing up.