HOW TO: Set up the Calypso stand-up kayak

HOW TO: Set up the Calypso stand-up kayak

October 15, 2021

  1. Pump the Calypso to 15PSI, making sure the nip on the valve is in the UP position.
  2. Add the window and pump to 3PSI - do not overinflate the window. Adjust the window into position if necessary.
  3. The calypso has threading installed in the fin box. TIP: Keep the fin hardware in the repair kit so you do not loose it! The plate that comes with the hardware is not needed since the box has threading. If the fin box does not have threading use the plate. (plate>fin>screw)
  4. Insert the dowel into the large opening in the fin box and slide the fin forwards.
  5. Press the fin down and use the thumbscrew to secure fin in place.
  6. Move your Calypso to the water to set up the seat. Make sure the fin is in deep enough water.
  7. Add the foam block and then the seat on top.
  8. Clip the seat onto the D-Rings on both sides of the Calypso, adjusting the straps for a proper fit and to find the position you want the seat to be in.
  9. The foam block has a hole in the back. Insert the paddle piece that is not in use. To secure it down for extra protection put it through the bungee cord.

Written by Jennifer Chrimes

  1. Pump the Calypso to 15PSI, making sure the nip on the valve is in the UP position.
  2. Add the window and pump to 3PSI - do not overinflate the window. Adjust the window into position if necessary.
  3. The calypso has threading installed in the fin box. TIP: Keep the fin hardware in the repair kit so you do not loose it! The plate that comes with the hardware is not needed since the box has threading. If the fin box does not have threading use the plate. (plate>fin>screw)
  4. Insert the dowel into the large opening in the fin box and slide the fin forwards.
  5. Press the fin down and use the thumbscrew to secure fin in place.
  6. Move your Calypso to the water to set up the seat. Make sure the fin is in deep enough water.
  7. Add the foam block and then the seat on top.
  8. Clip the seat onto the D-Rings on both sides of the Calypso, adjusting the straps for a proper fit and to find the position you want the seat to be in.
  9. The foam block has a hole in the back. Insert the paddle piece that is not in use. To secure it down for extra protection put it through the bungee cord.

Written by Jennifer Chrimes

JOIN THE OHANA

Enter your email and receive the latest news and stories from the Pau Hana ohana.

Value is required
Thank you!

CHECK OUT OUR GALLERY

paddleboarding in barbuda over blue seas
catching waves on a paddleboard in hawaii
paddleboarding over clear waters in barbuda
paddleboarding on lake rotoiti in new zealand
paddling through mangroves in barbuda
tropical waters of hawaii are great for paddleboarding


Leave a comment

Comments will be approved before showing up.


Also in DISCOVER

The Holiday Gift Guide
The Holiday Gift Guide

December 01, 2021

Looking for that perfect gift for the paddler in your life? Here's our guide to the best gifts that every SUP paddler will love to unwrap this Xmas!

Read More

HOW TO KEEP YOUR PADDLEBOARD STRAIGHT
HOW TO KEEP YOUR PADDLEBOARD STRAIGHT

October 22, 2021

Learn how to keep your paddleboard tracking in a straight line with tips from the Pau Hana SUP School.

Read More

GOING OFF GRID
GOING OFF GRID

July 12, 2021

Clint Taylor goes off grid with his partner, paddleboards and fishing equipment.

Read More